Table of Contents
Advertisement
1B-12 AIR CONDITIONING (OPTIONAL)
Installation
For Z13DT Engine Model
Reverse removal procedure to install receiver / dryer noting the
following instructions.
• Replenish specified amount of compressor oil to compressor
suction side by referring to "Replenishing compressor oil"
(Z13DT Engine) in this section.
• Be sure to install receiver / dryer (1) to proper direction as
1
shown.
• Evacuate and charge refrigerant by referring to "Evacuation
of A/C System" and "Charge" in this section.
For M15 Engine Model
NOTE:
For M15 engine model, refer to the same section of the
Service Manual mentioned in the "Foreword" of this ser-
vice manual.
Advertisement
Table of Contents
