POWER WINDOW SUB SWITCH
INSPECTION
Check for continuity between terminals at each switch condition
as shown below.
If check result is not as specified, replace.
Switch
Position
DOOR SWITCH
INSPECTION
Remove door switch from body and check switch for continuity.
If found detective, replace switch.
STOP LAMP (BRAKE) SWITCH
INSPECTION
Check stop lamp (brake) switch for continuity as shown in figure.
If found detective, replace switch.
1
Terminal
UP
OFF
DOWN
Door switch specification
OFF position (Door closed)
ON position (Door open)
Stop lamp (brake) switch specification
Switch slider (1) pushed ON : No continuity
Switch slider (1) released OFF : Continuity
BODY ELECTRICAL SYSTEM 8-27
B
SD
SU
No continuity
Continuity
D
U