Table of Contents
Advertisement
27) Remove input shaft front thrust bearing (1).
NOTE:
If input shaft front thrust bearing is not found, it may
have been taken out with oil pump assembly.
28) Remove input shaft rear thrust bearing (1) and thrust bearing
race (2).
NOTE:
If input shaft rear thrust bearing is not found, it may have
been taken out with direct clutch assembly.
29) Remove direct clutch hub (1).
30) Remove differential assembly (1) and counter shaft assem-
bly (2).
31) Remove governor apply No.2 gasket (1).
AUTOMATIC TRANSAXLE 7B-129
Advertisement
Table of Contents
