Table of Contents
Advertisement
7B-138 AUTOMATIC TRANSAXLE
68) Screwing 3 bolts (1), remove reduction drive gear (2).
Bolt
Length
1
30 mm (1.20 in.)
CAUTION:
Screw 3 bolts into reduction drive gear uniformly, or
reduction drive gear, bearing and transaxle case may be
damaged.
69) Blowing compressed air from oil hole of oil pump, remove
1st and reverse brake piston (1).
70) Remove parking lock pawl bracket (1).
71) With slotted screw driver, cut and unfold manual valve lever
spacer (1) and proceed to remove manual valve lever
spacer.
Advertisement
Table of Contents
