Table of Contents
Advertisement
6-3-24 ENGINE GENERAL INFORMATION AND DIAGNOSIS (Z13DT ENGINE)
Test
Work Order Description
T03
Tester Display – Glow plug control
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Tests under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press YES key ON
• Press NO key OFF
Concerned Terminals:
E27-70, E27-74 (For RM413D)
G88-70, G88-74 (For RB413D)
Yes: T04
T04
Tester Display – Radiator Fan Test
• Ignition ON
• Engine OFF
• Press corresponding key in the system main menu to select Out-
put Tests under Misc Test, select the desired test and confirm with
ENTER. Follow the instructions in the scan tool display.
• After the test is started, the corresponding component can be actu-
ated using the YES/NO keys.
• Press NO key OFF
• Press YES key ON
Concerned Terminals:
E27-7, E27-8 (For RM413D)
G88-7, G88-8 (For RB413D)
Yes: T05
Nominal Value
Diagnosis Glow Controller
Active
Diagnosis Glow Controller
Inactive
No: C-33
All cooling fans are
switched off
The blower speed is
increased stepwise.
The following component is
switched on:
Radiator Fan Motor
No: C-32
Advertisement
Table of Contents
