Table of Contents
Advertisement
(A)
3
1
2
(B)
MANUAL TRANSAXLE (M15 ENGINE MODEL) 7A2-45
3) Press-fit left bearing (2) using special tools and copper ham-
mer.
Special tool
(A) : 09913-76010
4) Support differential assembly (1) as illustrated so as to left
bearing (2) is floating, and then press-fit right bearing (3)
using special tool.
Special tool
(A) : 09913-76010
(B) : 09951-16060
5) Hold differential assembly with soft jawed vise (3), install
final gear (2) as shown in figure and then tighten bolts (1)
with thread lock cement applied to specified torque.
Apply thread lock cement to bolt thread when reusing bolts.
CAUTION:
Use of any other bolts than specified ones is prohibited.
"A" : Thread lock cement 99000-32110
Tightening torque
Final gear bolt (a) : 90 N·m (9.0 kg-m, 65.0 lb-ft)
Differential Adjustment
Judging from abnormality noted before disassembly and what is
found through visual check of component parts after disassembly,
prepare replacing parts and proceed to reassembly. Make sure
that all parts are clean.
1) Assemble differential gear and measure thrust play of differ-
ential gear as follows.
Differential gear thrust play
: 0.03 – 0.31 mm (0.001 – 0.012 in.)
• For left side
Advertisement
Table of Contents
