Table of Contents
Advertisement
9-42 BODY SERVICE
FRONT DOOR LOCK ASSEMBLY
[A] : Without power door lock model
[B] : With power door lock model
1. Front door latch assembly
: Apply lithium grease 99000-25010 to sliding part
2. Outside handle
5
SECURITY AND LOCKS
2
7
6
3
REMOVAL
1) Remove door trim and door sealing cover, refer to steps 1) to
2) Raise window all the way up.
3) Remove door sash.
4) Disconnect door opening control rod (1) from outside handle.
3
5) Disconnect door latch control rod (2).
6) Disconnect door lock motor lead wire (if equipped).
7
7) Remove door lock knob (3).
1
8
8) Loosen door latch screw (4), door latch actuator screw (5) (if
2
9) Remove key cylinder retainer (7).
10) Remove key cylinder (8).
4
6
[A]
1
[B]
1
3. Inside handle bezel
7. Key cylinder retainer
4. Latch striker
8. Door latch screw
5. Shim
9. Door latch striker screw
6. Key cylinder
10. Door latch actuator screw
6) of "REMOVAL" under "FRONT DOOR GLASS" in this sec-
tion.
equipped power door lock) and remove door lock assembly
(6).
8
5
4
9
8
10
Advertisement
Table of Contents
