Table of Contents
Advertisement
REMOVAL
1) Disconnect negative cable at battery and disable air bag sys-
tem, referring to "DISABLING AIR BAG SYSTEMS" in Sec-
tion 10B (if equipped).
2) Remove steering column hole cover and steering column
cover.
3) Remove steering column mounting bolts and nuts.
4) Remove interlock cable screw (1) located at ignition switch
and disconnect interlock cable (2) from key cylinder arm (3)
with ignition switch turned to "ACC" position.
5) Remove center console.
6) Remove cable end (1) from key interlock cam (2) and its
bracket (3).
7) Remove interlock cable (4).
INSTALLATION
1) Install interlock cable (1) to pedal brackets (2) by clamp as
shown in figure.
2) With ignition key at "ACC" position, connect cable end (1) to
key cylinder arm (2) and tighten cable screw (3) securely.
AUTOMATIC TRANSMISSION (4 A/T) 7B-73
Advertisement
Table of Contents
