Table of Contents
Advertisement
INSTALLATION
1) Using flat tip screwdriver, turn transmission range sensor to
have the match marks (1) line up (transmission range sensor
"N" range).
2) Turn selector lever (1) to "N" range (to have the automatic
transmission to "N" range).
3) Install transmission range sensor (1) to transmission case.
Tightening torque
Transmission range sensor bolt
(a) : 18 N·m (1.8 kg-m, 13.0 lb-ft)
4) Move selector lever in cabin to each range and check the
continuity of each terminal of transmission range sensor
referring to "INSPECTION".
5) Connect transmission range sensor coupler.
6) Check that the engine can only be started in "N" and "P"
range, but can not in "D", "2", "L" or "R" range. Also, check
that backup lamp come ON at "R" range.
AUTOMATIC TRANSMISSION (4 A/T) 7B-59
Advertisement
Table of Contents
