7F-6 REAR DIFFERENTIAL
DIFFERENTIAL UNIT
DISMOUNTING
1) Hoist vehicle and remove wheels.
2) Drain oil from rear differential. (Refer to "OIL CHANGE" in
3) Remove brake drum and disconnect parking brake cable
4) Remove axle shafts, refer to "REAR AXLE SHAFT AND
5) Before removing propeller shaft, give match marks (1) on
1
6) Remove differential carrier bolts and differential assembly
this section.)
1. Drain plug
2. Level plug
from brake back plate.
WHEEL BEARING REMOVAL" in Section 3E.
joint flange and propeller shaft as shown.
with viscous coupling case.