Manual Transmission Oil Change; Automatic Transmission Fluid Inspection; Automatic Transmission Fluid Change; Automatic Transmission Fluid Cooler Hose Inspection - Suzuki Grand Vitara 2011 Manual

Manual Transmission Oil Change

Change transmission oil with new specified oil referring
to "Manual Transmission Oil Change: For Petrol Engine
Model in Section 5B" or "Manual Transmission Oil
Change: For Diesel Engine Model in Section 5B".

Automatic Transmission Fluid Inspection

1) Inspect transmission case for evidence of fluid
leakage. Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level
check.
3) Check fluid level referring to "A/T Fluid Level Check
in Section 5A". If fluid level is low, replenish specified
fluid.

Automatic Transmission Fluid Change

1) Inspect transmission case for evidence of fluid
leakage. Repair leaky point, if any.
2) Make sure that vehicle is placed level.
3) Change fluid referring to "A/T Fluid Change in
Section 5A".
Automatic Transmission Fluid Cooler Hose
Inspection
Check automatic transmission fluid cooler hose for fluid
leakage, cracks, damage and deterioration. Replace
hose and/or clamp if any faulty condition is found.

Transfer Oil Inspection (If Equipped)

S6JB0A0206029
1) Check transfer case for evidence of oil leakage.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level
check.
3) Check oil level referring to "Transfer Oil Level Check:
Motor-Shift Type (Transfer with Shift Actuator) in
S6JB0A0206030
Section 3C" or "Transfer Oil Level Check: Non-Shift
Type (Transfer without Shift Actuator) in Section 3C".

Differential Oil Inspection

1) Check differential for evidence of oil leakage.
Repair leaky point if any.
2) Make sure that vehicle is placed level for oil level
check.
3) Remove level / filler plug of differentials (front and/or
S6JB0A0206031
rear) and check oil level.
Oil level can be checked roughly by means of level
plug hole. That is, if oil flows out of level plug hole or
if oil level is found up to hole when level / filler plug is
removed, oil is properly filled.
If oil is found insufficient, pour specified amount of
specified oil.
S6JB0A0206032
1. Oil level / filler plug (Apply sealant.)
4) Tighten level plug to specified torque.
For front differential, refer to "Front Differential Oil
Change: Front in Section 3B".
For rear differential, refer to "Rear Differential Oil
I5JB0A020025-02
Change: Rear in Section 3B".
Maintenance and Lubrication:
1
2
2. Drain plug (Apply sealant.)
0B-16
S6JB0A0206033
S6JB0A0206034
I5JB0A020015-03