Table of Contents
Advertisement
1
"a"
2
1
2
"a"
1
2
5) Install new molding (1) to glass (2).
6) Clean glass surface to be adhered to body with clean cloth. If
cleaning solvent is used, let it dry for more than 10 minutes.
Cleaning Area for windshield (distance from the edge of
glass or molding)
"a" : 30 - 50 mm (1.18 - 1.97 in.)
7) Install new spacer (1) to glass (2).
2
1
8) Using new brush, apply sufficient amount of primer for glass
along glass surface to be adhered to body.
NOTE:
• Be sure to refer to maker's instruction for proper han-
dling and drying time.
• Do not apply primer on outside of ceramic coated sur-
face.
• Do not touch primer coated surface.
Width applied primer for windshield
"a" : 22 mm (0.87 in.)
"b" : 15 mm (0.59 in.)
1. Molding
2. Fastener
3. Spacer
BODY SERVICE 9-15
Advertisement
Table of Contents
