5) Install the ball, valve spring and new O-ring.
Tightening torque:
T1: 13 N·m (1.3 kgf-m, 9.6 ft-lb)
T2: 16 N·m (1.6 kgf-m, 11.8 ft-lb)
(A)
(B)
(C)
(A) O-ring
(B) Relief valve spring
(C) Relief valve
(D) Valve spring
(E) Ball
(F) Harness bracket
E: INSPECTION
1) Completely remove with shop cloth if sludge is
adhered to the oil pan magnet.
2) Make sure there is no clog on the oil strainer. If
clogged, remove clog or replace the oil strainer.
3) Make sure there is no damage on each parts.
Replace damaged parts with new parts.
TRANSMISSION CASE
T1
T1
(A)
(D)
(E)
(F)
T2
MT-00542
MANUAL TRANSMISSION AND DIFFERENTIAL
6MT-71