Subaru Impreza 2003 Service Manual page 1869

C: DISASSEMBLY
1) Using the ST, remove the roller bearing (exten-
sion case side).
ST 498077000 REMOVER
(A)
(A) Roller bearing
2) Using the ST1 and ST2, remove the roller bear-
ing (transfer case side).
ST1 498077000 REMOVER
ST2 899864100 REMOVER
(A)
(A) Roller bearing
TRANSFER DRIVEN GEAR
D: ASSEMBLY
1) Using the ST, install the roller bearing (extension
case side).
ST1 398177700
ST2 899864100
NOTE:
Do not apply pressure in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton)
ST
MT-00143
2) Using the ST, install the roller bearing (transfer
case side).
ST 499757002
ST2
NOTE:
Do not apply pressure in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton)
ST1
MT-00144
E: INSPECTION
1) Bearings
Replace the bearings in the following cases:
• Broken or rusty bearings
• Worn or damaged
• Bearings that fail to turn smoothly or make ab-
normal noise when turned after gear oil lubrication.
2) Driven gear
Replace the drive gear in the following cases:
• If their tooth surfaces and shaft are excessively
broken or damaged.
5MT-61
MANUAL TRANSMISSION AND DIFFERENTIAL
INSTALLER
REMOVER
(A)
(A) Roller bearing
INSTALLER
(A) Roller bearing
ST2
ST1
MT-00145
ST
(A)
MT-00146