Subaru Impreza 2003 Service Manual page 2019

• Make sure to install the 1st-2nd hub in proper di-
rection.
(C)
(D)
(E)
(A) 1st-2nd hub
(B) Outer baulk ring
(C) Cutout portion of 1st-2nd hub
(D) Protrusion portion of outer baulk ring
(E) 1st driven gear
8) Using the ST, install the 2nd hub.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
(A) 2nd bush
(B) 1st-2nd hub
9) Make sure the 1st drive gear is smoothly turned
by hand. If not, reassemble.
10) Install the shifting insert key in proper place of
1st-2nd sleeve.
DRIVEN GEAR ASSEMBLY
(A)
(B)
(E)
(A)
MT-00600
ST
(A)
(B)
MT-00601
6MT-89
MANUAL TRANSMISSION AND DIFFERENTIAL
NOTE:
Angle of each shifting insert key is 120° apart.
11) Install the 1st-2nd sleeve to 1st-2nd hub.
NOTE:
Make sure to install the 1st-2nd sleeve in proper di-
rection.
(A) 1st driven gear
(B) 1st-2nd sleeve
(C) 1st driven gear side
MT-00602
(B)
(A)
(B)
(C)
MT-00603