Subaru Impreza 2003 Service Manual page 1999

9) Install the snap ring, washer and collar of driven
gear assembly.
(C)
(A)
(B)
(A) Washer
(B) Snap ring
(C) Collar
(D) Washer
10) Install the oil pump. <Ref. to 6MT-64, INSTAL-
LATION, Oil Pump.>
11) Install the center differential. <Ref. to 6MT-62,
INSTALLATION, Center Differential.>
12) Install the transfer driven gear. <Ref. to 6MT-
60, INSTALLATION, Transfer Driven Gear.>
13) Install the extension case. <Ref. to 6MT-49, IN-
STALLATION, Extension Case.>
14) Install the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-44,
INSTALLATION, Oil Pipe.>, <Ref. to 6MT-47, IN-
STALLATION, Neutral Position Switch.>, <Ref. to
6MT-45, INSTALLATION, Back-up Light Switch.>
15) Install the manual transmission assembly to ve-
hicle. <Ref. to 6MT-39, INSTALLATION, Manual
Transmission Assembly.>
TRANSMISSION CASE
(B)
(A)
(C)
(D)
MT-00534
MANUAL TRANSMISSION AND DIFFERENTIAL
C: DISASSEMBLY
1) Remove the oil pipe and oil guide.
(B)
(A) Oil pipe
(B) Oil guide
2) Remove the bolt, and then remove the O-ring,
relief spring and relief valve.
(A) O-ring
(B) Relief valve spring
(C) Relief valve
3) Remove the bolt, and then remove the O-ring,
valve spring and ball.
(A) O-ring
(B) Valve spring
(C) Ball
6MT-69
(A)
(A)
(B)
(C)
MT-00535
MT-00536
(A)
(B)
(C)
MT-00537