Subaru Impreza 2003 Service Manual page 2004

MANUAL TRANSMISSION AND DIFFERENTIAL
6) Install the reverse shifter fork assembly to re-
verse idler gear assembly.
(C)
(A) Reverse idler gear assembly
(B) Reverse shifter fork
(C) Reverse sleeve
7) Install the reverse idler gear assembly.
(B)
(A) Reverse idler gear assembly
(B) 1st drive gear
(C) Reverse gear
8) Install the thrust bearing of driven gear assem-
bly.
9) Press each shifter fork, main shaft assembly,
driven gear assembly and reverse idler gear as-
sembly, then install to the adapter plate at once.
NOTE:
Two people should do the work.
MAIN SHAFT ASSEMBLY
(B)
(A)
MT-00551
(A)
(C)
MT-00552
10) Install the plunger, checking spring, new gasket
and checking plug.
Tightening torque:
37 N·m (3.8 kgf-m, 27.3 ft-lb)
(A)
(B)
(A) Checking plug
(B) Gasket
(C) Checking spring
(D) Plunger
6MT-74
(C)
(D)
MT-00553