Subaru Impreza 2003 Service Manual page 1993

17.Oil Pump
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
4) Remove the transfer driven gear. <Ref. to 6MT-
60, REMOVAL, Transfer Driven Gear.>
5) Remove the center differential. <Ref. to 6MT-62,
REMOVAL, Center Differential.>
6) Remove the oil guide.
(A) Oil guide
7) Remove the snap ring.
(A) Snap ring
(B) Support
OIL PUMP
8) Using the ST, remove the neutral set spring and
support.
ST1 18756AA000 CLAW
ST2 398663600
9) Raise the striking rod up, and then remove the
spring pin.
(A)
MT-00520
(A)
10) Remove the selector arm No.2 and shifter arm.
(B)
MT-00485
6MT-63
MANUAL TRANSMISSION AND DIFFERENTIAL
PLIERS
ST2 ST2
(A)
(B)
(A) Striking rod
(B) Spring pin
(A)
(A) Selector arm No. 2
(B) Shifter arm
ST1
MT-00486
MT-00487
(B)
MT-00488