Subaru Impreza 2003 Service Manual page 2049

2) Using the ST, install the 5th-6th shifter fork.
ST 398791700 REMOVER
NOTE:
Make sure to install the 5th-6th shifter fork and arm
in proper direction.
(B)
(A) 5th-6th shifter fork
(B) 5th-6th shifter arm
(C) Spring pin
4. SHIFT ARM SHAFT
Using the ST, install the selector arm.
ST 398791700 REMOVER
NOTE:
Make sure to install the selector arm and rod in
proper direction.
(A) Selector rod
(B) Selector arm
5. STRIKING ROD
1) Using the ST, install the reverse interlock arm
and interlock arm.
ST 398791700 REMOVER
NOTE:
• Make sure to install the reverse interlock arm and
rod in proper direction.
SHIFTER FORK AND ROD
(C)
(A)
MT-00699
(B)
(A)
MT-00700
MANUAL TRANSMISSION AND DIFFERENTIAL
• Make sure to install the interlock arm and rod in
proper direction.
(A) Reverse interlock arm
(B) Interlock arm
(C) Spring pin
2) Install the reverse interlock block and interlock
block to striking rod.
NOTE:
Make sure to install the reverse interlock block and
interlock block in proper direction.
(B)
(A) Reverse interlock block
(B) Interlock block
E: INSPECTION
1) Check the shift shaft and shift rod for damage.
Replace if damaged.
2) Repair or replace the gearshift mechanism if ex-
cessively worn, bent, or defective in any way.
F: ADJUSTMENT
1. SELECTION OF 1st
NOTE:
Perform the following procedures when.
• Replacing the 1st, 2nd driven gear.
• Replacing the 1st, 2nd synchro ring assembly.
• Replacing the adapter plate.
• Replacing the driven shaft.
• Replacing the 1st-2nd hub, sleeve assembly.
6MT-119
(C)
(C)
(A)
(B)
MT-00701
(A)
MT-00688
2nd FORK ROD
-