Subaru Impreza 2003 Service Manual page 1847

• Turbo MODEL
11) Disconnect the return spring and clutch cable.
(1.6 L model)
12) Remove the pitching stopper.
13) Set the ST.
NOTE:
Also is available Part No. 41099AA010.
ST 41099AA020 ENGINE SUPPORT ASSY
14) Separate the clutch release fork from release
bearing. (Turbo model)
MANUAL TRANSMISSION ASSEMBLY
MT-00068
MT-00803
MT-00069
S T
MT-00070
MANUAL TRANSMISSION AND DIFFERENTIAL
(1) Remove the clutch operating cylinder from
transmission.
(2) Remove the plug using 10 mm hexagon
wrench.
(3) Screw the 6 mm dia. bolt into release fork
shaft, and then remove it.
(A) Shaft
(B) Bolt
(4) Raise the release fork and unfasten the re-
lease bearing tabs to free release fork.
NOTE:
Step (4) is required to prevent interference with en-
gine when removing the engine from transmission.
5MT-39
MT-00071
(A)
(B)
MT-00072