Subaru Impreza 2003 Service Manual page 1924

MANUAL TRANSMISSION AND DIFFERENTIAL
C: INSPECTION
1) Check the shift shaft and shift rod for damage.
Replace if damaged.
2) Gearshift mechanism:
Repair or replace the gearshift mechanism if ex-
cessively worn, bent, or defective in any way.
3) Inspect the clearance between 1st, 2nd driven
gear and reverse driven gear. If any clearance is
not within specifications, replace the shifter fork as
required.
Clearance (a) and (b):
9.5 mm (0.374 in)
(a)
(A)
(A) 1st driven gear
(B) Reverse driven gear
(C) 2nd driven gear
1st-2nd shifter fork
Part No. Mark
32804AA060
32804AA070 —
32804AA080
4) Inspect the clearance between 3rd, 4th drive
gear and coupling sleeve. If any clearance is not
within specifications, replace the shifter fork as re-
quired.
SHIFTER FORK AND ROD
(b)
(B) (C)
MT-00313
Remarks
Approach to 1st gear
1
by 0.2 mm (0.008 in).
Standard
Become distant from
3 2nd gear by 0.2 mm
(0.008 in).
Clearance (a) and (b):
7.3 mm (0.287 in)
(A)
(A) 3rd drive gear
(B) Coupling sleeve
(C) 4th drive gear
Part No.
32810AA061
32810AA071
32810AA101
5) Inspect the clearance between 5th drive gear
and coupling sleeve. If any clearance is not within
specifications, replace the shifter fork as required.
Clearance (a):
9.3 mm (0.366 in)
(A)
(A) 5th drive gear
(B) Coupling sleeve
5MT-116
(a) (b)
(B)
(C)
MT-00940
3rd-4th shifter fork
Mark Remarks
Approach to 4th gear
1
by 0.2 mm (0.008 in).
— Standard
Become distant from
3 3rd gear by 0.2 mm
(0.008 in).
(a)
(B)
MT-00315