Subaru Impreza 2003 Service Manual page 1865

10.Rear Case
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 5MT-38, REMOVAL, Manual
Transmission Assembly.>
2) Remove back-up light switch and neutral posi-
tion switch. <Ref. to 5MT-48, REMOVAL, Switches
and Harness.>
3) Remove rear case.
B: INSTALLATION
1) Install rear case.
Tightening torque:
24.5 N·m (2.5 kgf-m, 18.1 ft-lb)
2) Install back-up light switch and neutral position
switch. <Ref. to 5MT-49, INSTALLATION, Switch-
es and Harness.>
3) Install the manual transmission assembly to ve-
hicle. <Ref. to 5MT-41, INSTALLATION, Manual
Transmission Assembly.>
C: DISASSEMBLY
1) Remove the reverse check assembly. <Ref. to
5MT-63, REMOVAL, Reverse Check Sleeve.>
2) Remove oil guide.
3) Remove oil seal.
REAR CASE
D: ASSEMBLY
1) Install oil seal.
2) Install oil guide.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
3) Install the reverse check assembly. <Ref. to
5MT-63,
Sleeve.>
MT-00942
MT-00943
5MT-57
MANUAL TRANSMISSION AND DIFFERENTIAL
INSTALLATION, Reverse Check