D: ASSEMBLY
1) Install the oil seal into clutch housing without
damaging.
ST 399513600INSTALLER
2) Install the clutch release bearing guide.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
E: INSPECTION
1) Make sure there is no damage or crack on the
clutch housing. Replace the clutch housing with a
new one if there is excessive damage.
2) Check the clutch housing for gear oil leakage. If
there is oil leakage, repair or replace the leakage
part.
CLUTCH HOUSING
ST
MT-00719
MT-00717
MANUAL TRANSMISSION AND DIFFERENTIAL
6MT-129