Subaru Impreza 2003 Service Manual page 1997

18.Transmission Case
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-44,
REMOVAL, Oil Pipe.>, <Ref. to 6MT-47, REMOV-
AL, Neutral Position Switch.>, <Ref. to 6MT-45,
REMOVAL, Back-up Light Switch.>
4) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
5) Remove the transfer driven gear. <Ref. to 6MT-
60, REMOVAL, Transfer Driven Gear.>
6) Remove the center differential. <Ref. to 6MT-62,
REMOVAL, Center Differential.>
7) Remove the oil pump. <Ref. to 6MT-63, RE-
MOVAL, Oil Pump.>
8) Remove the shim and spacer of driven gear as-
sembly.
(A)
(A) Driven gear assembly
9) Remove the snap ring.
TRANSMISSION CASE
10) Remove the pilot bolt.
11) Remove the holder reverse bolt.
MT-00526
12) Remove the transmission case.
NOTE:
If the oil guide catches on shift fork, the transmis-
sion case may be difficult to be removed. Move the
oil guide right and left to remove. Do not pull the
transmission case by force.
MT-00527
13) Completely remove the remaining liquid gasket
on transmission case and adapter plate.
6MT-67
MANUAL TRANSMISSION AND DIFFERENTIAL
MT-00528
MT-00529
MT-00530