Subaru Impreza 2003 Service Manual page 1927

C: INSPECTION
1) After installing the snap ring, measure the clear-
ance between snap ring and counter washer.
Clearance:
0.05 — 0.35 mm (0.0020 — 0.0138 in)
2) If the clearance is out of measured value, select
a snap ring and install to put clearance within mea-
sured value. <Ref. to 5MT-119, ADJUSTMENT,
Counter Gear.>
D: ADJUSTMENT
Selection of snap ring:
If the measurement is not within specification, se-
lect suitable snap ring.
Snap ring
Part No.
031319000
805019010
COUNTER GEAR
Thickness mm (in)
1.50 (0.0591)
1.72 (0.0677)
5MT-119
MANUAL TRANSMISSION AND DIFFERENTIAL