Subaru Impreza 2003 Service Manual page 2103

7) Remove the bolts and nuts which secure brake
and clutch pedals, and remove pedal bracket and
clutch cable as a unit.
(A)
(A) Clutch pedal
(B) Brake pedal
8) Depress the clutch pedal, then disconnect the
clutch cable from clutch pedal.
2. RHD MODEL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from clutch. (Model
with cruise control)
3) Remove the instrument panel lower cover.
4) Remove the snap pin and clevis pin that join
push rod and clutch pedal. (Except 1.6 L model)
5) Remove the master cylinder mounting nuts. (Ex-
cept 1.6 L model)
(A)
(A) Master cylinder
CLUTCH PEDAL
6) Remove the PHV adjusting nut and lock nut.
(Model with hill holder)
7) Remove the cable clamp and disconnect the
PHV cable from PHV. (Model with hill holder)
CAUTION:
(B)
Carefully protect the boot and inner cable from
damage when disconnecting the PHV cable.
CL-00215
8) Disconnect the clutch cable from release lever.
(1.6 L model)
9) Remove the clutch pedal and bracket as a unit.
CL-00216
CL-41
(A)
(C)
(A) Adjusting nut
(B) Lock nut
(C) PHV
(A)
(B)
(A) PHV cable
(B) Clamp
(A) Clutch pedal bracket
(B) Clutch pedal
CLUTCH SYSTEM
(B)
CL-00091
CL-00092
( A )
( B )
CL-00126