Subaru Impreza 2003 Service Manual page 2334

ABS
3. OUTPUT VOLTAGE
Output voltage can be checked by the following
method. Install the resistor and condenser, then ro-
tate the wheel about 2.75 km/h (2 MPH) or equiva-
lent.
Output voltage specification:
0.12 — 1 V (at 20 Hz)
NOTE:
Regarding terminal No., please refer to item 1. ABS
WHEEL SPEED SENSOR. <Ref. to ABS-17, ABS
WHEEL SPEED SENSOR, INSPECTION, Rear
ABS Wheel Speed Sensor.>
60 mV
0
60 mV
20 Hz
17.8 K
(2)
(2)
(1) Oscilloscope
(2) Terminal
D: ADJUSTMENT
Adjust the gap using
26755AA000).
REAR ABS WHEEL SPEED SENSOR
(1)
5 % 562 5 %
ABS00146
spacer (Part No.
ABS-18