Subaru Impreza 2003 Service Manual page 1860

MANUAL TRANSMISSION AND DIFFERENTIAL
8. Preparation for Overhaul
A: PROCEDURE
1) Clean oil, grease, dirt and dust from transmis-
sion.
2) Remove the drain plug to drain oil. After drain-
ing, retighten it as before.
NOTE:
Replace the gasket with a new one.
Tightening torque:
69 N·m (7.0 kgf-m, 50.6 ft-lb)
3) Attach the transmission to ST.
ST 499937100 TRANSMISSION STAND
4) Rotating parts should be coated with oil prior to
assembly.
5) All disassembled parts, if to be reused, should
be reinstalled in the original positions and direc-
tions.
6) Gaskets, lock washers and lock nut must be re-
placed with new ones.
7) Liquid gasket should be used where specified to
prevent leakage.
PREPARATION FOR OVERHAUL
MT-00097
S T
MT-00115
5MT-52