Subaru Impreza 2003 Service Manual page 1573

26) Remove the bolt securing ball joint of trans-
verse link to housing.
• WAGON MODEL
• SEDAN MODEL
27) Remove the spring pins and separate the front
drive shafts from each side of transmission.
28) Remove the nuts which hold the lower side of
transmission to engine.
AUTOMATIC TRANSMISSION ASSEMBLY
AT-00684
MT-00076
AT-00685
AT-00108
29) Place the transmission jack under transmis-
sion.
NOTE:
Make sure that the support plates of transmission
jack don't touch the oil pan.
30) Remove the transmission rear crossmember
from vehicle.
31) Remove the transmission.
CAUTION:
Move the transmission and torque converter as
a unit away from engine.
32) Separate the transmission assembly and rear
cushion rubber.
4AT-41
AUTOMATIC TRANSMISSION
AT-00024
AT-00109