Subaru Impreza 2003 Service Manual page 1972

MANUAL TRANSMISSION AND DIFFERENTIAL
7. Preparation for Overhaul
A: PROCEDURE
1) Clean oil, grease, dirt and dust from transmis-
sion.
2) Remove the drain plug to drain oil. After drain-
ing, retighten it as before.
NOTE:
Replace the gasket with a new one.
Tightening torque:
Oil pan side
44 N·m (4.5 kgf-m, 32.5 ft-lb)
Clutch housing
70 N·m (7.1 kgf-m, 51.6 ft-lb)
(A) Drain plug (Oil pan side)
(B) Drain plug (Clutch housing side)
3) Attach the transmission to ST.
ST 18632AA000 STAND ASSY
ST
ST
4) Rotating parts should be coated with oil prior to
assembly.
5) All disassembled parts, if to be reused, should
be reinstalled in the original positions and direc-
tions.
6) Gaskets, lock washers and lock nut must be re-
placed with new ones.
7) Liquid gasket should be used where specified to
prevent leakage.
PREPARATION FOR OVERHAUL
(A)
(B)
MT-00450
ST
MT-00468
6MT-42