Subaru Impreza 2003 Service Manual page 2021

19) Make sure the 2nd driven gear is smoothly
turned by hand. If not, reassemble.
20) Install the key.
21) Using the ST, install the 5th-6th driven gear.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
NOTE:
• Make sure to install the 5th-6th driven gear in
proper direction.
• Align the groove of 5th-6th driven gear with key.
ST
(B)
(A) 6th gear
(B) 5th gear
(C) 4th gear
DRIVEN GEAR ASSEMBLY
22) Using the ST, install the ball bearing.
ST 18654AA000INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
NOTE:
Make sure to install the ball bearing in proper direc-
tion.
MT-00610
23) Make sure the ball bearing is smoothly turned
by hand. If not, reassemble.
24) Install a new lock nut.
25) Install the ST3 to lock nut, then install the ST to
driven gear assembly and tighten lock nut.
ST1 18666AA000 HOLDER
ST2 18664AA000 BASE
(A) ST3 18620AA000 ADAPTER WRENCH
ST4 18852AA000 TORQUE WRENCH
(C)
Tightening torque:
MT-00611
6MT-91
MANUAL TRANSMISSION AND DIFFERENTIAL
ST
530 N·m (54.0 kgf-m, 391 ft-lb)
ST3
MT-00612
ST4
ST2
ST1
MT-00613