MANUAL TRANSMISSION AND DIFFERENTIAL
24) Connect the return spring and clutch cable.
(1.6 L model)
25) Install the drive select cable on transmission.
(Dual-range model)
( C )
( B )
(A) Snap pin
(B) Clevis pin
(C) Drive select cable
26) Connect the following connectors:
(1) Transmission ground cable
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
(2) Vehicle speed sensor connector
(3) Neutral position switch connector
(4) Back-up light switch connector
(5) High-low switch connector (Dual-range
model)
27) Install the air cleaner case stay.
Tightening torque:
16 N·m (1.6 kgf-m, 11.6 ft-lb)
28) Install the air cleaner case and duct.
29) Connect the battery ground cable to battery.
30) Take off the vehicle from lift arms.
MANUAL TRANSMISSION ASSEMBLY
MT-00803
( A )
MT-00066
5MT-44