Subaru Impreza 2003 Service Manual page 2128

FRONT SUSPENSION
6. REAR WHEEL TOE-IN
• Inspection
Toe-in:
0 ± ± ± ± 3 mm (0 ± ± ± ± 0.12 in)
For rear toe-in inspection procedure, refer to
FRONT WHEEL TOE-IN procedure.
<Ref. to FS-11, FRONT WHEEL TOE-IN, INSPEC-
TION, Wheel Alignment.>
• Adjustment
1) Loosen the self-locking nut on inner side of link
rear.
NOTE:
When loosening or tightening the adjusting bolt,
hold the bolt head and turn self-locking nut.
(1) Adjusting bolt
(2) Link rear
2) Turn the adjusting bolt head until toe-in is at the
specification.
NOTE:
When the right and left wheels are adjusted for toe-
in at the same time, the movement of one scale
graduation changes toe-in by approx. 1.5 mm (0.6
in).
WHEEL ALIGNMENT
(1)
(2)
FS-00017
FS-12