Subaru Impreza 2003 Service Manual page 1876

MANUAL TRANSMISSION AND DIFFERENTIAL
9) Separate the transmission case into right and
left cases by loosening the seventeen coupling
bolts and nuts.
10) Remove the drive pinion shaft assembly from
left side transmission case.
NOTE:
Use a hammer handle, etc. to remove if too tight.
( B )
(A) Drive pinion shaft assembly
11) Removing high-low shifter fork:
Raise the main shaft assembly slightly, and remove
the high-low shifter fork together with high-low
shifter shaft and washer.
NOTE:
Be careful not to drop the two high-low shifter piec-
es.
( B )
(A) High-low shifter fork
(B) Input shaft ASSY
TRANSMISSION CASE
MT-00160
( A )
MT-00161
( A )
MT-00169
12) Remove the main shaft assembly and input
shaft assembly.
CAUTION:
Be careful not to drop the input shaft and main
shaft as they are separable.
(A) Main shaft ASSY
(B) Input shaft ASSY
13) Remove the differential assembly.
NOTE:
• Be careful not to confuse the right and left roller
bearing outer races.
• Be careful not to damage the retainer oil seal.
5MT-68
(A)
(B)
MT-00170
MT-00808