Subaru Impreza 2003 Service Manual page 2010

MANUAL TRANSMISSION AND DIFFERENTIAL
14) Install the 5th needle bearing and 5th drive
gear.
(B)
(A) 5th needle bearing
(B) 5th drive gear
15) Install the 5th baulk ring.
16) Install the 5th-6th hub.
(1) Set to the main shaft, taking care of 5th-6th
hub installing direction.
(A) Main shaft
(B) 5th-6th hub
(C) 5th drive gear
MAIN SHAFT ASSEMBLY
(A)
MT-00568
MT-00569
(A)
(B)
(C)
MT-00570
6MT-80
(2) Using the ST, press in the 5th-6th hub.
ST1 18651AA000 INSTALLER
ST2 398177700 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
NOTE:
When pressing in 5th-6th hub, align the protrusion
portion of outer baulk ring and cutout portion of 5th-
6th bush by moving the outer baulk ring.
(C)
(D)
(A) 5th-6th hub
(B) Outer baulk ring
(C) Cutout portion of 5th-6th hub
(D) Protrusion portion of outer baulk ring
17) Make sure the 5th drive gear is smoothly turned
by hand. If not, reassemble.
ST1
(A)
ST2
(A)
(B)
MT-00571