Subaru Impreza 2003 Service Manual page 1656

AUTOMATIC TRANSMISSION
20) Be careful not to mistake the location of the leaf
spring to be inserted.
(A)
(B)
(A) Leaf spring
(B) Retaining plate
21) Install thrust needle bearing in the correct di-
rection.
(A)
(A) Snap ring
(B) Thrust needle bearing
(C) Upside
(D) Downside
22) Install front sun gear and thrust needle bearing.
(A)
(B)
(A) Front sun gear
(B) Thrust needle bearing
23) Install the high clutch hub.
Attach the thrust needle bearing to the hub with va-
seline and install the hub by correctly engaging the
splines of the front planetary carrier.
AT TRANSMISSION MAIN CASE
AT-00252
(C)
(D)
(B)
AT-00256
AT-00251
4AT-124
24) Install the thrust needle bearing in proper direc-
tion.
(A) High clutch hub
(B) Thrust needle bearing
(C) Upside
(D) Downside
(E) Outside
25) Install the high clutch assembly.
(A)
(A) High clutch and reverse clutch assembly
26) Adjust total end play. <Ref. to 4AT-105, AD-
JUSTMENT, Oil Pump Housing.>
27) Install the thrust needle bearing in proper direc-
tion.
(A) High clutch and reverse clutch ASSY
(B) Thrust needle bearing
(C) Upside
(D) Downside
(E) Outside
AT-00234
AT-00235
AT-00312