Subaru Impreza 2003 Service Manual page 2020

MANUAL TRANSMISSION AND DIFFERENTIAL
12) Install the outer baulk ring.
13) Install the 2nd synchro cone.
14) Install the inner baulk ring.
15) Sufficiently apply gear oil to the bush, 2nd nee-
dle bearing and inner periphery of 2nd drive gear.
16) Install the 2nd needle bearing and 2nd driven
gear.
DRIVEN GEAR ASSEMBLY
NOTE:
Align the protrusion portion of 2nd synchro cone
with 2nd driven gear hole, then install.
MT-00604
17) Install the key.
MT-00605
18) Using the ST, install the 3rd-4th driven gear.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 lmp ton).
MT-00606
NOTE:
• Make sure to install the 3rd-4th driven gear in
proper direction.
• Align the groove of 3rd-4th driven gear with key.
6MT-90
(B)
(C)
(A) 2nd needle bearing
(B) 2nd driven gear
(C) Protrusion portion of 2nd synchro cone
ST
(B)
(A) 4th gear
(B) 3rd gear
(C) 2nd gear
(A)
MT-00607
MT-00608
(A)
(C)
MT-00609