Subaru Impreza 2003 Service Manual page 2009

8) Install the 4th baulk ring.
9) Sufficiently apply gear oil to the main shaft, 4th
needle bearing and inner periphery of 4th drive
gear.
10) Install the 4th needle bearing and 4th drive
gear.
(B)
(A) 4th needle bearing
(B) 4th drive gear
11) Install the 5th bush.
MAIN SHAFT ASSEMBLY
MT-00564
(A)
MT-00565
6MT-79
MANUAL TRANSMISSION AND DIFFERENTIAL
(1) Set to the main shaft, taking care not to
overlap the main shaft oil hole and 5th bush oil
hole.
A
(B)
(C)
A - A
(A) 5th bush
(B) Main shaft oil hole
(C) Main shaft
(D) 5th bush oil hole
(E) 4th drive gear
(2) Using the ST, press in the 5th bush.
ST1 18651AA000 INSTALLER
ST2 398177700 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
12) Make sure the 4th drive gear is smoothly turned
by hand. If not, reassemble.
13) Sufficiently apply gear oil to the main shaft, 5th
needle bearing and inner periphery of 5th drive
gear.
(A)
A
(D)
(C)
(E)
(C)
(A)
(B)
MT-00566
ST1
ST2
MT-00567