Subaru Impreza 2003 Service Manual page 2337

G SENSOR
ABS
8. G Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the console cover.
<Ref. to EI-42, REMOVAL, Console Box.>
3) Disconnect the connector from G sensor.
4) Remove the G sensor from body.
CAUTION:
• Do not drop or bump the G sensor.
• G sensor and the bracket are integrated into
one unit. Therefore, do not disassemble it.
ABS00151
B: INSTALLATION
1) Install in the reverse order of removal.
CAUTION:
Do not drop or bump the G sensor.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
ABS-21