Subaru Impreza 2003 Service Manual page 1903

4) Straighten the lock nut at staked portion. Re-
move the lock nut using ST1 and ST2.
ST1 499987300 SOCKET WRENCH (50)
ST2 899884100 HOLDER
ST2
ST1
5) Remove the 5th driven gear using ST.
ST 499857000 5TH DRIVEN GEAR REMOV-
ER
6) Remove the woodruff key.
7) Remove the roller bearing, 3rd-4th driven gear
using ST1 and ST2.
ST1 499757002 INSTALLER
ST2 899714110 REMOVER
8) Remove the key.
DRIVE PINION SHAFT ASSEMBLY
MT-00247
S T
MT-00248
ST1
ST2
MT-00249
5MT-95
MANUAL TRANSMISSION AND DIFFERENTIAL
9) Remove the 2nd driven gear, inner baulk ring,
synchro cone and outer baulk ring. (Except 1.6 L
model)
(A) 2nd driven gear
(B) Inner baulk ring
(C) Synchro cone
(D) Outer baulk ring
10) Remove the 2nd driven gear assembly. (1.6 L
model)
11) Remove the 1st driven gear, 2nd gear bushing,
gear and hub using ST1 and ST2.
NOTE:
Replace the gear and hub if necessary. Do not at-
tempt to disassemble if at all possible because they
must engage at a specified point. If they should be
disassembled, mark engagement point before-
hand.
ST1 499757002 INSTALLER
ST2 899714110 REMOVER
12) Remove the sub gear for 1st driven gear.
2. FWD MODEL
1) Loosen lock nut using ST1 and ST2.
ST1 49987100 or 499987003 or 899984103
SOCKETWRENCH (35)
ST2 899884100 HOLDER
(D) (A)
(C) (B)
MT-00250
ST1
ST2
MT-00251