Subaru Impreza 2003 Service Manual page 2045

25.Shifter Fork and Rod
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the oil pipe, neutral position switch,
back-up light switch and harness. <Ref. to 6MT-44,
REMOVAL, Oil Pipe.>, <Ref. to 6MT-47, REMOV-
AL, Neutral Position Switch.>, <Ref. to 6MT-45,
REMOVAL, Back-up Light Switch.>
4) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
5) Remove the transfer driven gear. <Ref. to 6MT-
60, REMOVAL, Transfer Driven Gear.>
6) Remove the center differential. <Ref. to 6MT-62,
REMOVAL, Center Differential.>
7) Remove the oil pump. <Ref. to 6MT-63, RE-
MOVAL, Oil Pump.>
8) Remove the transmission case. <Ref. to 6MT-
67, REMOVAL, Transmission Case.>
9) Remove each gear assembly. <Ref. to 6MT-72,
REMOVAL, Main Shaft Assembly.>
B: INSTALLATION
1) Install each gear assembly at once. <Ref. to
6MT-73, INSTALLATION, Main Shaft Assembly.>
2) Install the transmission case. <Ref. to 6MT-68,
INSTALLATION, Transmission Case.>
3) Install the oil pump. <Ref. to 6MT-64, INSTAL-
LATION, Oil Pump.>
4) Install the center differential. <Ref. to 6MT-62,
INSTALLATION, Center Differential.>
5) Install the transfer driven gear. <Ref. to 6MT-60,
INSTALLATION, Transfer Driven Gear.>
6) Install the extension case. <Ref. to 6MT-49, IN-
STALLATION, Extension Case.>
7) Install the oil pipe, neutral position switch, back-
up light switch and harness. <Ref. to 6MT-44, IN-
STALLATION, Oil Pipe.>, <Ref. to 6MT-47, IN-
STALLATION, Neutral Position Switch.>, <Ref. to
6MT-45, INSTALLATION, Back-up Light Switch.>
8) Install the manual transmission assembly to ve-
hicle. <Ref. to 6MT-39, INSTALLATION, Manual
Transmission Assembly.>
SHIFTER FORK AND ROD
C: DISASSEMBLY
NOTE:
Discard the removed spring pin and replace with a
new one.
1. REVERSE SHIFTER FORK
1) Using the ST, remove the reverse fork.
ST 398791700
2) Using the ST, remove the reverse shifter arm.
ST 398791700
2. 1st-2nd, 3rd-4th SHIFTER FORK
1) Using the ST, remove the 3rd-4th shifter fork.
ST 398791700
6MT-115
MANUAL TRANSMISSION AND DIFFERENTIAL
REMOVER
ST
REMOVER
ST
REMOVER
ST
MT-00680
MT-00681
MT-00682