Subaru Impreza 2003 Service Manual page 1986

MANUAL TRANSMISSION AND DIFFERENTIAL
B: INSTALLATION
1) Insert the reverse lock plunger.
2) Install in the order of reverse check plug, spring,
gasket and plug.
Tightening torque:
41 N·m (4.2 kgf-m, 30.2 ft-lb)
(A) Plug
(B) Gasket
(C) Spring
(D) Reverse check plug
REVERSE CHECKING SYSTEM
(D)
(C)
(B)
(A)
MT-00497
6MT-56
3) Install the spring and reverse check shaft to ex-
tension case.
NOTE:
Be sure the spring end aligns with the hole of re-
verse check shaft and cutout portion of extension
case.
(B)
(A)
(C)
(A) Reverse check shaft
(B) Spring
(C) Hole
(D) Cutout portion
4) Install the washer and snap ring.
(A) Snap ring
(B) Washer
5) Set the ST1 to reverse check shaft. Install a new
oil seal, then press with ST2.
ST1 18671AA000 OIL SEAL GUIDE
(B)
(A)
(D)
MT-00499
(B)
(A)
MT-00494