Subaru Impreza 2003 Service Manual page 2098

CLUTCH SYSTEM
B: INSTALLATION
1. EXCEPT RHD DOHC TURBO MODEL
Install in the reverse order of removal.
NOTE:
Bleed the clutch fluid. <Ref. to CL-38, Clutch Fluid
Air Bleeding.>
Tightening torque:
T1: 15 N·m (1.5 kgf-m, 10.8 ft-lb)
T2: 18 N·m (1.8 kgf-m, 13.0 ft-lb)
T3: 25 N·m (2.5 kgf-m, 18.1 ft-lb)
T1
T3
(A) Clutch pipe (LHD model)
(B) Clip
(C) Clutch hose
(D) Clutch pipe (RHD model)
CLUTCH PIPE AND HOSE
T1
T1
T2
CL-00125
2. RHD DOHC TURBO MODEL
Install in the reverse order of removal.
NOTE:
Bleed the clutch fluid. <Ref. to CL-38, Clutch Fluid
Air Bleeding.>
Tightening torque:
T1: 7.5 N·m (0.76 kgf-m, 5.53 ft-lb)
T2: 8 N·m (0.8 kgf-m, 5.8 ft-lb)
T3: 15 N·m (1.5 kgf-m, 10.8 ft-lb)
T4: 18 N·m (1.8 kgf-m, 13.0 ft-lb)
T5: 25 N·m (2.5 kgf-m, 18.1 ft-lb)
T3
(A)
T3
(C)
(A) Clutch pipe
(B) Connector
(C) Clutch hose
C: INSPECTION
Check the pipes and hoses for cracks, breakage, or
damage. Check the joints for fluid leakage. If any
cracks, breakage, damage, or leakage is found, re-
pair or replace the applicable pipe or hose.
CL-36
T3
T1
T3
(A)
(B)
T5
T3
T4
(A)
T2
T5
CL-00061