Subaru Impreza 2003 Service Manual page 2087

2. EXCEPT 2.5 L MODEL
1) Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER
S T
2) Tighten the flywheel attaching bolts to the spec-
ified torque.
NOTE:
Tighten the flywheel installing bolts gradually. Each
bolt should be tightened to the specified torque in a
crisscross fashion.
Tightening torque:
72 N·m (7.3 kgf-m, 52.8 ft-lb)
( 5 )
( 3 )
( 8 )
( 2 )
3) Install the clutch disc and cover. <Ref. to CL-21,
EXCEPT 2.5 L MODEL, INSTALLATION, Clutch
Disc and Cover.>
4) Install the transmission assembly. <Ref. to 5MT-
41, INSTALLATION, Manual Transmission Assem-
bly.>
FLYWHEEL
CL-00020
( 1 )
( 7 )
( 4 )
( 6 )
CL-00021
C: INSPECTION
CAUTION:
Since this bearing is grease sealed and is of a
non-lubrication type, do not wash with gasoline
or any solvent.
1) Damage of facing and ring gear
If defective, replace the flywheel.
• 2.5 L MODEL
( A )
(A) Flywheel
(B) Ring gear
• Except 2.5 L MODEL
( A )
(A) Flywheel
(B) Ring gear
2) Smoothness of rotation
Rotate the ball bearing applying pressure in thrust
direction.
3) If noise or excessive play is noted, replace the
flywheel.
CL-25
CLUTCH SYSTEM
( B )
CL-00124
( B )
CL-00022