Subaru Impreza 2003 Service Manual page 2148

REAR SUSPENSION
1. General Description
A: SPECIFICATIONS
Model
Camber (tolerance: ±0°45')
Toe-in
Thrust angle
Wheel arch height [tolerance: ±12 mm (±0.47 in)]
Diameter of stabilizer
NOTE:
• Front and rear toe-ins and front camber can be
adjusted. If toe-in or camber tolerance exceeds
specifications, adjust toe-in and camber to the mid-
dle value of specification.
• The other items indicated in the specification ta-
ble cannot be adjusted. If the other items exceeds
specifications, check suspension parts and con-
nections for deformities; replace with new ones as
required.
(1) Front
A − B = Positive: Toe-in, Negative: Toe-out
α = Each toe angle
GENERAL DESCRIPTION
Non-turbo
−1°25'
381 mm
(15.0 in)
17 mm
(0.67 in)
B
(1)
A
FS-00001
Sedan
Turbo Non-turbo
−1°30' −1°15'
0±3 mm (0±0.12 in) Each toe angle: ±0°09'
0°±30'
376 mm 381 mm
(14.80 in) (15.0 in)
20 mm
(0.79 in)
RS-2
Wagon
OUTBACK
Turbo
−1°20'
376 mm
(14.80 in)
17 mm
—
(0.67 in)
−1°10'
386 mm
(15.20 in)
—