Subaru Impreza 2003 Service Manual page 1693

SUBARU SELECT MONITOR
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
3. CLEAR MEMORY MODE
1) On the «Main Menu» display screen, select the
{2. Each System Check} and press the [YES] key.
2) On the «System Selection Menu» display
screen, select the {Transmission Control System}
and press the [YES] key.
3) Press the [YES] key after the information of
transmission type is displayed.
4) On the «Transmission Diagnosis» display
screen, select the {Clear Memory} and press the
[YES] key.
5) When the "Done" and "Turn Ignition Switch OFF"
are shown on display screen, turn the Subaru Se-
lect Monitor and ignition switch to OFF.
NOTE:
For detailed operation procedure, refer to the Sub-
aru Select Monitor OPERATION MANUAL.
4AT-23