Subaru Impreza 2003 Service Manual page 1985

13.Reverse Checking System
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-37, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-42, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-49,
REMOVAL, Extension Case.>
4) Remove the snap ring and washer from reverse
check shaft.
(A) Snap ring
(B) Washer
5) Remove the reverse check shaft and spring from
extension case.
REVERSE CHECKING SYSTEM
(B)
(A)
MT-00494
MT-00495
6MT-55
MANUAL TRANSMISSION AND DIFFERENTIAL
6) Remove the spring pin, and then remove the re-
verse check lever and oil seal from reverse check
shaft.
NOTE:
Do not reuse the oil seal.
(C)
(A) Spring pin
(B) Reverse check lever
(C) Oil seal
7) Remove the plug from extension case, then re-
move the gasket, spring and plunger.
NOTE:
Do not reuse the gasket.
(A) Plug
(B) Gasket
(C) Spring
(D) Plunger
8) Remove the reverse lock plunger.
(A)
(A) Reverse lock plunger
(B)
(A)
MT-00496
(D)
(C)
(B)
(A)
MT-00497
MT-00498