Subaru Impreza 2003 Service Manual page 2109

• 1.6 L MODEL
1) Disconnect the ground cable from battery.
2) Remove the air cleaner case and intake duct.
<Ref. to IN(H4SO)-5, REMOVAL, Air Cleaner
Case.> and <Ref. to IN(H4SO)-6, REMOVAL, Air
Intake Duct.>
3) Remove the release lever return spring from le-
ver.
4) Loosen the lock nut.
5) Adjust the spherical nut of the lever end so that
the play and full stroke is within the specified value,
(center of spherical nut).
CAUTION:
Take care not to twist the cable during adjust-
ment.
Play: 3 — 4 mm (0.12 — 0.16 in)
Full stroke: 24 — 26 mm (0.94 — 1.02 in)
(A)
(A) Play
(B) Full stroke
6) Upon completion of adjustment, securely lock
the spherical nut with lock nut.
Tightening torque:
5.9 N·m (0.60 kgf-m, 4.3 ft-lb)
(A)
(B)
(A) Lock nut
(B) Spherical nut
(C) Clutch release lever
7) Install the return spring on lever.
NOTE:
Hook the long hook side of the return spring with
the lever.
CLUTCH PEDAL
(B)
CL-00228
(C)
CL-00229
8) Depress the clutch pedal to assure there is no
abnormality in the clutch system.
9) Install the air cleaner case and intake duct. <Ref.
to IN(H4SO)-5, INSTALLATION, Air Cleaner
Case.> and <Ref. to IN(H4SO)-6, INSTALLATION,
Air Intake Duct.>
CL-47
CLUTCH SYSTEM