Subaru Impreza 2003 Service Manual page 1621

D: ASSEMBLY
Assemble in the reverse order of disassembly.
NOTE:
• Use a new revolution gear and ball bearings.
• Make sure the clutch hub is oriented in the cor-
rect direction.
(A)
(A) Front side
(B) Clutch hub
(C) Rear side
(D) Revolution gear
E: INSPECTION
• Inspect parts to make sure there are no holes,
cuts, and that they are not dusty.
• Inspect extension end play and adjust it to within
the standard value. <Ref. to 4AT-85, VTD MODEL,
ADJUSTMENT, Transfer Clutch.>
REAR DRIVE SHAFT
(B)
(C)
(D)
AT-00152
4AT-89
AUTOMATIC TRANSMISSION