Subaru Impreza 2003 Service Manual page 1602

AUTOMATIC TRANSMISSION
20.Transmission Control Mod-
ule (TCM)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lower cover and then disconnect
the connector.
3) Disconnect the connectors from TCM.
LHD model
( A )
(A) Transmission control module (TCM)
(B) Brake pedal
RHD model
(A)
(A) Transmission control module (TCM)
(B) Column shaft
4) Remove the TCM.
TRANSMISSION CONTROL MODULE (TCM)
AT-00041
AT-00811
(B)
AT-00093
B: INSTALLATION
1) Install the TCM.
LHD model
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
(A) Transmission control module (TCM)
(B) Brake pedal
RHD model
Tightening torque:
18 N·m (1.8 kgf-m, 13 ft-lb)
(A)
(A) Transmission control module (TCM)
(B) Column shaft
2) Connect the connectors to TCM.
3) Install in the reverse order of removal.
4AT-70
( A )
AT-00811
(B)
AT-00093